Filters
Absolutely No Tariff Charges!

Secure Checkout

Absolutely No Tariff Charges!
Your Shopping Cart Is Empty

Secure Checkout

RG58C/U Cable Assemblies

RG58C/U Cable Assemblies

RG Type:58C/U
Conductor: 20 AWG 19/32 Tinned Copper
Insulation: Solid Polyethylene
Nom. Core O.D.: 0.115 in
Shielding: Tinned Copper
Jacket: Non-Contaminating PVC -Type 11A
Nom. O.D.: 0.199 in

UL Style: 1354

Nom. Velocity of Propagation: 83%
Nominal Capacitance: 16.2 pF/ft
Nominal Impedance: 50 ohms
Operating Temperature: 80 ºC

Cutoff Frequency: 1000Mhz

Nom. Attenuation:
1.4 dbl/100 ft at 10 MHz
4.1 dbl/100 ft at 50 MHz
5.3 dbl/100 ft at 100 MHz
8.2 dbl/100 ft at 200 MHz
12.6 dbl/100 ft at 400 MHz
20.0 dbl/100 ft at 900 MHz
24.0 dbl/100 ft at 1000 MHz

 

Connector side 1
Connector side 2

Cable Type

Select Cable parameters

1. What is the maximum data transmission rate supported by RG58C/U cable assemblies?

The maximum data transmission rate supported by RG58C/U cable assemblies is dependent on a few factors. First, the type of Connectors being used must be taken into account. RG58C/U cable assemblies are usually used for short-distance, low-speed data transmissions, such as for RF Communications. As such, the maximum data transmission rate supported by RG58C/U cable assemblies is typically limited to 1,000MHz (Megahertz)

2. What is the maximum length of RG58C/U cable assemblies?

The maximum length of RG58C/U cable assemblies depends on a variety of factors, including the type of connectors, the application, and the environment in which the cable is used. Generally speaking, the maximum length for RG58C/U cable assemblies is 100 meters (328 feet). However, this is only a general guideline and the maximum length may vary depending on the specific application and environment.

3. What is the minimum bend radius of RG58C/U cable assemblies?

The minimum bend radius of RG58C/U cable assemblies depends on several factors, including the type of connector, used. Generally speaking, The minimal perminate installed Bend Radius is 0.98" (inches). The repeated or continuious Bend Radius is 1.96" (inches).

4. What is the maximum operating temperature of RG58C/U cable assemblies?

Generally speaking, the maximum operating temperature of RG58C/U cable assemblies is typically between -20°C and +80°C (-4°F and +176°F).

The type of insulation used in the cable assembly will have a significant impact on the maximum operating temperature.

5. What is the maximum voltage rating of RG58C/U cable assemblies?

The maximum voltage rating of RG58C/U cable assemblies depends on several factors, including the type of connectors used, and the environment in which the cable is used.

Generally the maximum opertating voltage of RG58C/U is 1,900volts.

6. What is the maximum current rating of RG58C/U cable assemblies?

The maximum current rating of RG58C/U cable assemblies depends on several factors, including the type of cable used, the length of the cable, and the environment in which the cable is used.

RG58C/U is a coaxial cable, which is composed of an inner conductor surrounded by an insulating material, a shielding layer, and an outer jacket.

7. What is the impedance of RG58C/U cable assemblies?

The impedance of RG58C/U cable assemblies depends on a variety of factors, including the type of cable, the length of the cable, and the environment in which it is used. Generally, RG58C/U cable assemblies have an impedance of 50 ohms. However, this can vary depending on the type of cable and the length of the cable.

8. What is the attenuation of RG58C/U cable assemblies?

The attenuation of RG58C/U cable assemblies is a measure of the signal loss that occurs when a signal is transmitted through the cable. It is expressed in decibels (dB) per unit length, and is typically specified in terms of the attenuation at a given frequency.

At lower frequencies, the attenuation of RG58C/U cable assemblies is relatively low. At frequencies below 1 MHz, the attenuation is typically around 0.2 dB per foot.

9. Are RG58C/U cable assemblies RoHS compliant?

RG58C/U cable assemblies are RoHS compliant. RoHS, or the Restriction of Hazardous Substances, is an EU directive that restricts the use of certain hazardous materials in electrical and electronic products. It applies to all products sold in the EU, and requires that all products meet certain standards for hazardous substances.