Part Number: SMAM-LMR240-SMAM-Length
Price: $10.84
As Low As:$7.72
  • SMA Male Connector On LMR-240 To SMA Male Connector Cable AssemblySMA Male Connector On LMR-240 To SMA Male Connector Cable Assembly

Product Details

SMA Male to SMA Male LMR-240 Cable Assembly is Ideal for Jumper in Wireless Communications Systems needing Low Loss Communications 50ohm Coax Cable. This SMA Male to SMA Male Low Loss RF Cable uses Times Microwave LMR-240 has the lowest loss of any flexible cable and comparable loss to semirigid hard-line cables including LMR 240 vs RG8x.

The SMA Male to SMA Male LMR-240 Cable Assembly is a custom coaxial assembly with RF Shielding is 50 dB greater than typical single shielded coax (40 dB). The multi-ply bonded foil outer conductor is rated conservatively at > 90 dB (i.e. >180 dB between two adjacent cables).

SMAM-LMR240-SMAM-Length is custom made to your requirements. Enter your required cable length in the box. Any Additional cable length must be entered in Feet. Any additional footage will be added to the base price at 0.80cents per foot. Cable is 100% inspected before shipping. Please Enter any additional information for your cable you require.

For Questions On this Product Click Here to Email Us

Request Drawing:drawing SMAM-LMR240-SMAM-Length
Drawing will be emailed to you.


SMA Male Connector On LMR-240 To SMA Male Connector Cable Assembly

Part Number:SMAM-LMR240-SMAM-Length
Price: $10.84
As Low As:$7.72

Quantity Discounts:
Price Each
Resale Prices Available For This Part. Please Call!
Availability: Custom cable assembly. Made to your specifications. Stock to 1-2 Week Depending on Quantity. We build you your exact requirements. Custom labeling and private labeling available

Additional Plating Options Upon Request:2 Standard Gold Plated Brass or Nickel Plated Brass are used on standard RF Cable Assemblies.... Additional connector plating options upon request include: Gold Plated Stainless Steel, Passivated Stainless Steel, Olive Drab Plated Brass, White Bronze Plated Brass, Black Oxide/Chrome Plating and Tri-metal Albaloy/SUCO coating for LOW PIM applications. Call 888-413-4353 for your specific requirements.

Cable Specifications:

Description Material In. (mm)
Inner Conductor: Solid Bare Copper
Inner Conductor Diameter: 0.056in (1.42mm)
Dielectric: Foam PE
Dielectric Diameter: 0.150in (3.81mm)
Outer Shield: Aluminum Tape
Outer Shield Diameter: 0.155in (3.94mm)
Overall Braid: Tinned Copper
Overall Braid Diameter: 0.178in (4.52mm)
Over All Cable Diamter: 0.240in (6.10mm)

Environmental Specifications
Installation Temperature Range: F-40/+185 [C-40/+85]
Storage Temperature Range: F-94/+185 [C-70/+85]
Operating Temperature Range: F-40/+185 [C-40/+85]

Electrical Specifications

Velocity of Propagation: 84%
Dielectric Constant: 1.42
Time Delay: 1.21nS/ft (3.97nS/m)
Impedance: 50ohms
Capacitance: 24.2pF/ft (79.4pF/m)
Inductance: 0.060uH/ft (0.20uH/m)
Shielding Effectiveness: >90dB

DC Resistance
Inner Conductor: 3.2ohms/1000ft (10.5ohms/km)
Outer Conductor: 3.89ohms/1000ft (12.8ohms/km)
Voltage Withstand: 1500Volts DC
Jacket Spark: 5000Volts RMS
Peak Power: 5.6 kW

Cuttoff Frequency: 31Ghz

Frequency (MHz) 30 50 150 220 450 900 1500 1800 2000 2500 5800
Attenuation dB/100 ft 1.3 1.7 3.0 3.7 5.3 7.6 9.9 10.9 11.5 12.9 20.4
Attenuation dB/100 m 4.4 5.7 9.9 12.0 17.3 24.8 32.4 35.6 37.7 42.4 66.8
Avg. Power kW 1.49 1.15 0.66 0.54 0.38 0.26 0.20 0.18 0.17 0.15 0.10


Connector Specification:

SMA Male to SMA Male LMR-240 Coaxial Cable Assembly

VSWR: Typical < 1.30 VSWR
(connector dependent)
Peak Power: 5.6kW
Frequency: Cuttoff 31GHz
Material Type: PE (Polyethylene)
Impedance: 50ohm
Temperature Rating: -40c to +85c
Connector Side 1: SMA Male
Connector Side 2: SMA Male