LMR-200 Cable Assemblies
Flexible Low Loss Communications Coax
Ideal for...
- Jumper Assemblies in Wireless Communications Systems
- Short Antenna Feeder runs
- Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax,
SCADA, Mobile Antennas) requiring an easily routed,
low loss RF cable
LMR-200(r) Specifications
Description Material In. (mm)
Inner Conductor Solid BC 0.044 (1.12)
Dielectric Foam PE 0.116 (2.95)
Outer Conductor Aluminum Tape 0.121 (3.07)
Overall Braid Tinned Copper 0.144 (3.66)
Jacket (see table above) 0.195 (4.95)
Mechanical Specifications
Performance Property Units US (metric)
Bend Radius: installation in. (mm) 0.5 (12.7)
Bend Radius: repeated in. (mm) 2 (50.8)
Bending Moment ft-lb (N-m) 0.2 (0.27)
Weight lb/ft (kg/m) 0.022 (0.03)
Tensile Strength lb (kg) 40 (48)
Flat Plate Crush lb/in. (kg/mm) 15 (0.27)
Electrical Specifications
Performance Property Units US (metric)
Velocity of Propagation % 83
Dielectric Constant NA 1.45
Time Delay nS/ft (nS/m) 1.22 (4.02)
Impedance ohms 50
Capacitance pF/ft (pF/m) 24.5 (80.3)
Inductance uH/ft (uH/m) 0.061 (0.20)
Shielding Effectiveness dB >90
DC Resistance
Inner Conductor ohms/1000ft (/km) 5.36 (17.6)
Outer Conductor ohms/1000ft (/km) 4.9 (16.1)
Voltage Withstand Volts DC 1000
Jacket Spark Volts RMS 3000
Peak Power kW 2.5
Attenuation vs. Frequency
Frequency (MHz) | 30 | 50 | 150 | 220 | 450 | 900 | 1500 | 1800 | 200 | 2500 | 5800 |
Attenuation dB/100 ft | 1.8 | 2.3 | 4.0 | 4.8 | 7.0 | 9.9 | 12.9 | 14.2 | 15.0 | 16.9 | 26.4 |
Attenuation dB/100 m | 5.8 | 7.5 | 13.1 | 15.9 | 22.8 | 32.6 | 42.4 | 46.6 | 49.3 | 55.4 | 86.5 |
Avg. Power kW | 1.02 | 0.79 | 0.45 | 0.37 | 0.26 | 0.18 | 0.14 | 0.13 | 0.12 | 0.11 | 0.07 |
Choose From Over 12446 LMR-200 Cable Assemblies Connector Combinations